Mercedes E-Coupé C207 PD850 Black-Edition Widebody Kit

On vehicles with PDC, cut-outs for the PDC sensors must be prepared in the bumper and the PDC mounts from the old front bumper must be adapted. On vehicles with a headlight washer system (SRA), the existing headlight washer system can be adapted to the front bumper. To do this, the headlight washer system and the cover caps must be transferred to the front bumper. Ideally, part of the inner structure of the original standard front bumper is transferred. The pair of front fenders replaces the original parts. To fit the bonnet add-on, the standard bonnet must be cut accordingly in the area of the intakes. The insulation mat must be cut out in the area of the suggested front air intakes if these are to be open. The rear side panel widening is bonded onto the original body and worked in. For this, the underlying fender edges/flanges must be adapted to/removed for the widening beforehand. The rear bumper is supplied with the rear diffuser and the corresponding cut-outs for a duplex (right & left) rear silencer. If a duplex system is already fitted, the buyer must check compatibility of the rear silencer with our bumper. Alternatively, we can offer you matching tailpipes, a matching stainless steel rear silencer or a complete exhaust system.

Please note that with our widebody kits, the rear wheel arches and, if necessary, the front fenders must be cut out to provide sufficient clearance.