PD Black Edition V2/V1 Bonnet for Mercedes CL C216
Fits all Mercedes CL C216 models incl. CL63 & CL65 AMG
- Part number
- 4260609891966
- Vehicle
- Mercedes CL
- Condition on delivery
- unpainted
- Road approval
- Supplied with material certificate only. Individual approval according to § 21 StVZO is required for road use in Germany.
- Delivery time
- Production time 4–6 weeks plus delivery time
Note on vehicle compatibility
Fit & Installation
Fits only the pre-facelift Mercedes CL C216.
- Developed in Germany
- Supplied unpainted – painting and fitting by a specialist workshop recommended
- Shipping within Europe, securely packed
Description
Our PD Black Edition V2 / V1 Bonnet gives the Mercedes CL C216 a more dynamic look and accentuates the sporty lines of the vehicle. The material is a glass-fibre composite, elaborately laminated by hand and then finished.
The PD Black Edition V2 / V1 Bonnet replaces the original bonnet and thus gives the Mercedes CL C216 an individual character and a certain touch of motorsport flair.
Fits the following Mercedes CL C216 models:
- Mercedes CL C216/W216 CL500
- Mercedes CL C216/W216 CL500 BlueEFFICIENCY
- Mercedes CL C216/W216 CL600
- Mercedes CL C216/W216 CL63 AMG
- Mercedes CL C216/W216 CL65 AMG
Scope of delivery, version:
- PD Black Edition V2 / V1 Bonnet for Mercedes CL C216
- Mounting material (on special request)
Installation:
We generally recommend having the installation carried out by suitably qualified specialists. Depending on the aerodynamic package/body package/body kit/widebody kit, the installation work can range from minor to very extensive. Depending on your region, we are happy to offer you professional installation at our premises or refer you to one of our sales and installation partners.
Material & workmanship
On vehicles with PDC, recesses for the PDC sensors must be prepared in the bumper. On vehicles with a headlight washer system (SRA), the existing system can be adapted to the front bumper; the washer system and its cover caps must be fitted into the front bumper.
The grille inserts must be glued into the respective openings. Ideally, the wheel-arch liners should be extended. To fit the front wings, the washer-fluid reservoir must be modified because of the air intakes. To fit the bonnet, the bonnet locks must be transferred from the original bonnet; the insulation mat is omitted. The rear side-panel widening is bonded to the original body and must be blended into the side panel.
